More than a purchase. You get service and expert advice. Ask which products and combinations are recommended for you.
Furnaces are suitable for testing technology where the exact
distribution of temperature, the controlled increase and decrease of
temperature, and controlled cooling are important, and where it is also
desirable that the heating elements are not in the interior space with
the samples. This especially applies to heating material for the heat
treatment of metal, various tests of sintering, calcination,
determination of the softening point or of material sintering,
combusting samples, enamel firing etc. The rust-resistant coating
ensures the long life of the furnace. The heating spirals are placed in
tubes of silica glass. This partially protects the spirals from
corrosion by aggressive materials which can be released during use. A
programmable controller and the master switch are located on the front
side of the furnace.
Standard equipment of furnace:
manually opening of the door downwards with an end switch
HT60B controller
heating elements in silica tubes
slide valve for opening the supply of air
airing chimney
Accessories for an additional charge:
controller HT 40P
exhaust ventilator with a draft damper (only the HT 40P controller)
enhancement of the controller with the RS 232 or RS 485 communication line (Monitoring SW Ht Monit optional)
